Dumpcar model 33-980








It is intended for transportation on industrial railway tracks of the mining enterprises from pits and unloading on dumps or crushers of open-cast mountain minings of overburden rocky breeds and ores of mountain weight with a density of 1,75 - 4,0 t/m3. The design of the wagon is calculated on direct falling of blocks weighing up to 3 tons from height of 3 meters on adding not less than 300 mm.
The body of a dumpcar is equipped with an emphasis from shift in the longitudinal direction of rather lower frame, and also, the castle devices, connecting the bogie to the lower frame.
The pneumatic system of unloading provides an inclination of a body and bilateral unloading, and also, compulsory return of a body to train situation after unloading.
Technical specifications
Track gauge, mm |
1520 |
|
Bogie type |
18-9902, 18-522, 18-9823 |
|
Number of wheel sets, pcs |
6 |
|
Loading capacity, t, not less |
105 |
|
Max weight of empty wagon, t |
51 |
|
Body volume, m3, not less |
50 |
|
The maximum settlement static load from wheel set on rails, kN (ts) |
254,97 (26) |
|
Base of wagon, mm |
9340±5 |
|
Length over axes of automatic coupling, mm |
15036±25 |
|
External dimensions (loading gauge) ГОСТ 9238-83, ДСТУ Б В.2.3-29 |
1-Т |
|
Height from railhead to the horizontal axis of the automatic coupling, mm |
1060±20 |
|
Unloading system |
pneumatic |
|
Working pressure in cylinders when unloading, MPa (kgs/cm2) |
0,7 (7,0) |
|
Body tilt angle when unloading, degrees, not less |
45 |
|
Number of unloading cylinders, pcs |
6 |
|
Design speed , km\h: - on the public ways in an empty state - on the ways of industrial transport in an empty state - on the ways of industrial transport in a loaded state |
100 70 40 |
![]() ISO 9001:2008 |
![]() Dumpcar 33-980 |
![]() TS dumpcar 33-980 |
![]() TS repair dumpcar 33-980 |